Deploying Persistent Volume Claims with the Linode Block Storage CSI Driver

What is the Linode Block Storage CSI Driver?

The Container Storage Interface (CSI) defines a standard that storage providers can use to expose block and file storage systems to container orchestration systems. Linode’s Block Storage CSI driver follows this specification to allow container orchestration systems, like Kubernetes, to use Block Storage Volumes to persist data despite a Pod’s lifecycle. A Block Storage Volume can be attached to any Linode to provide additional storage.

Before You Begin

This guide assumes you have a working Kubernetes cluster running on Linode. You can deploy a Kubernetes cluster on Linode in the following ways:

1. Use the Linode Kubernetes Engine (LKE) to deploy a cluster. LKE is Linode’s managed Kubernetes service. You can deploy a Kubernetes cluster using:

   • The Linode Cloud Manager.
   • Linode’s API v4.
   • Terraform, the popular infrastructure as code (IaC) tool.

2. Deploy an unmanaged Kubernetes cluster using Terraform and the Kubernetes Terraform installer.

3. Use kubeadm to manually deploy a Kubernetes cluster on Linode. You can follow the Getting Started with Kubernetes: Use kubeadm to Deploy a Cluster on Linode guide to do this.

   Note

   The Block Storage CSI Driver supports Kubernetes version 1.13 or higher. To check the version of Kubernetes you are running, you can issue the following command:

   kubectl version

   After deploying your cluster with kubeadm, to continue with this guide, you’ll need to install the CSI driver using the instructions in the Installing the Linode Block Storage CSI Driver guide.

   Note

   Using either the Linode Kubernetes Engine or Terraform methods above will install both the Linode Block Storage CSI Driver and the linode secret token as part of their deployment methods automatically.

Create a Persistent Volume Claim

A Persistent Volume Claim (PVC) consumes a Block Storage Volume. To create a PVC, create a manifest file with the following YAML:

File: pvc.yaml

1 2 3 4 5 6 7 8 9 10 11

apiVersion: v1 kind: PersistentVolumeClaim metadata: name: pvc-example spec: accessModes: - ReadWriteOnce resources: requests: storage: 10Gi storageClassName: linode-block-storage-retain

This PVC represents a Block Storage Volume. Because Block Storage Volumes have a minimum size of 10 gigabytes, the storage has been set to 10Gi. If you choose a size smaller than 10 gigabytes, the PVC will default to 10 gigabytes.

Currently the only mode supported by the Linode Block Storage CSI driver is ReadWriteOnce, meaning that it can only be connected to one Kubernetes node at a time.

To create the PVC in Kubernetes, issue the create command and pass in the pvc.yaml file:

kubectl create -f pvc.yaml

After a few moments your Block Storage Volume will be provisioned and your Persistent Volume Claim will be ready to use.

You can check the status of your PVC by issuing the following command:

kubectl get pvc

You should see output like the following:

NAME          STATUS   VOLUME                 CAPACITY   ACCESS MODES   STORAGECLASS                  AGE
pvc-example   Bound    pvc-0e95b811652111e9   10Gi       RWO            linode-block-storage-retain   2m

Now that you have a PVC, you can attach it to a Pod.

Attach a Pod to the Persistent Volume Claim

Now you need to instruct a Pod to use the Persistent Volume Claim. For this example, you will create a Pod that is running an ownCloud container, which will use the PVC.

To create a Pod that will use the PVC:

1. Create a manifest file for the Pod and give it the following YAML:

   File: owncloud-pod.yaml

   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

   apiVersion: v1 kind: Pod metadata: name: owncloud labels: app: owncloud spec: containers: - name: owncloud image: owncloud/server ports: - containerPort: 8080 volumeMounts: - mountPath: "/mnt/data/files" name: pvc-example volumes: - name: pvc-example persistentVolumeClaim: claimName: pvc-example

   This Pod will run the owncloud/server Docker container image. Because ownCloud stores its files in the /mnt/data/files directory, this owncloud-pod.yaml manifest instructs the ownCloud container to create a mount point at that file path for your PVC.

   In the volumes section of the owncloud-pod.yaml, it is important to set the claimName to the exact name you’ve given your PersistentVolumeClaim in its manifest’s metadata. In this case, the name is pvc-example.

2. Use the create command to create the ownCloud Pod:

   kubectl create -f owncloud-pod.yaml

3. After a few moments your Pod should be up and running. To see the status of your Pod, issue the get pods command:

   kubectl get pods

   You should see output like the following:

   NAME       READY   STATUS    RESTARTS   AGE
   owncloud   1/1     Running   0          2m

4. To list the contents of the /mnt/data/files directory within the container, which is the mount point for your PVC, issue the following command on your container:

   kubectl exec -it owncloud -- /bin/sh -c "ls /mnt/data/files"

   You should see output similar to the following:

   admin  avatars	files_external	index.html  lost+found owncloud.db  owncloud.log

   These files are created by ownCloud, and those files now live on your Block Storage Volume. The admin directory is the directory for the default user, and any files you upload to the admin account will appear in this folder.

To complete the example, you should be able to access the ownCloud Pod via your browser. To accomplish this task, you will need to create a Service.

1. Create a Service manifest file and copy in the following YAML:

   File: owncloud-service.yaml

   1 2 3 4 5 6 7 8 9 10 11 12

   kind: Service apiVersion: v1 metadata: name: owncloud spec: selector: app: owncloud ports: - protocol: TCP port: 80 targetPort: 8080 type: NodePort

   Note

   The service manifest file will use the NodePort method to get external traffic to the ownCloud service. NodePort opens a specific port on all cluster nodes and any traffic that is sent to this port is forwarded to the service. Kubernetes will choose the port to open on the nodes if you do not provide one in your service manifest file. It is recommended to let Kubernetes handle the assignment. Kubernetes will choose a port in the default range, 30000-32768.

   Alternatively, you could use the LoadBalancer service type, instead of NodePort, which will create Linode NodeBalancers that will direct traffic to the ownCloud Pods. Linode’s Cloud Controller Manager (CCM) is responsible for provisioning the Linode NodeBalancers. For more details, see the Kubernetes Cloud Controller Manager for Linode repository.

2. Create the service in Kubernetes by using the create command and passing in the owncloud-service.yaml file you created in the previous step:

   kubectl create -f owncloud-service.yaml

3. To retrieve the port that the ownCloud Pod is listening on, use the describe command on the newly created Service:

   kubectl describe service owncloud

   You should see output like the following:

   Name:                     owncloud
   Namespace:                default
   Labels:                   <none>
   Annotations:              <none>
   Selector:                 app=owncloud
   Type:                     NodePort
   IP:                       10.106.101.155
   Port:                     <unset>  80/TCP
   TargetPort:               8080/TCP
   NodePort:                 <unset>  30068/TCP
   Endpoints:                10.244.1.17:8080
   Session Affinity:         None
   External Traffic Policy:  Cluster
   Events:                   <none>

   Find the NodePort. In this example the port is 30068.

4. Get a list of your cluster’s nodes. You will need this to find one of your node’s external IP addresses.

   kubectl get nodes

   You will see a similar output:

   NAME                        STATUS   ROLES    AGE    VERSION
   example-cluster-master-1    Ready    master   104m   v1.17.0
   example-cluster-node-1      Ready    <none>   103m   v1.17.0
   example-cluster-node-2      Ready    <none>   104m   v1.17.0
   example-cluster-node-3      Ready    <none>   103m   v1.17.0

5. Describe any one of your nodes in order to retrieve its external IP address. The node which you select does not matter, however, ensure that you do not use your cluster’s master.

   kubectl describe nodes example-cluster-node-1 | grep 'ExternalIP'

   The output will include your node’s external IP address:

   ExternalIP:  192.0.2.0

   The IP address of the node in this example is 192.0.2.0. Your ownCloud instance in this example would be accessible from http://192.9.2.0:30068.

6. Navigate to the IP address of the node, including the NodePort you looked up in a previous step. You will be presented with the ownCloud log in page. You can log in with the username admin and the password admin.

7. Upload a file. You will use this file to test the Persistent Volume Claim.

8. The Persistent Storage Claim has been created and is using your Block Storage Volume. To prove this point, you can delete the ownCloud Pod and recreate it, and the Persistent Storage Claim will continue to house your data:

   kubectl delete pod owncloud
   kubectl create -f owncloud-pod.yaml

   Once the Pod has finished provisioning you can log back in to ownCloud and view the file you previously uploaded.

You have successfully created a Block Storage Volume tied to a Persistent Volume Claim and have mounted it with a container in a Pod.

Delete a Persistent Volume Claim

To delete the Block Storage PVC created in this guide:

1. First, delete the ownCloud Pod. This command will also result in your Block Storage Volume being detached from the cluster.

   kubectl delete pods owncloud

2. Then, delete the persistent volume claim:

   kubectl delete pvc pvc-example
   Note

   If you used the linode-block-storage-retain StorageClass when creating your PVC, this command will delete the PVC, however, your Block Storage Volume and its data will persist in a detached state. To permanently remove the Block Storage Volume from your Linode Account, see View, Create, and Delete Block Storage Volumes.

   If, instead, you used the linode-block-storage StorageClass when creating your PVC, this command will delete the PVC along with your Block Storage Volume and its data.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• Kubernetes PersistentVolumeClaims Documentation
• Container Storage Interface (CSI) Spec